The new KERONG maps use a different addressing system.
To set the address, you need to:
Lift the cover on the card to access address dials A and B👉 We recommend using a small flat-head screwdriver to open the cover easily.
How it works:
Dial A corresponds to the units
Dial B corresponds to the tens
Configuration examples:
For an X’Locker address of 1:
A = 1
B = 0
For an X'Locker address set to 2:
A = 2
B = 0
For an X'Locker address of 12:
A = 2
B = 1
⚠️ The final address is therefore read as: B (tens) + A (units)
Finalisation
Once the address has been set, close the cover.
👉 You may need to apply a little pressure by hand to ensure it clicks into place properly.