🛠️ Required tools
⚙️ Replacement steps
1. Disconnect the air supply
2. Access the fitting
a. Unscrew the two screws on the rear panel
Use a 2.5 mm Allen key.
b. Lift and remove the panel
3. Replace the fitting
a. Hold the fitting and unscrew it from the inside
Use a 15 mm open-end wrench to remove the old fitting.
b. Screw in the new air fitting
4. Reinstall the rear panel
Screw back the two screws with the 2.5 mm Allen key.
5. Reconnect the air supply and test
Reconnect the air supply.
Check the proper operation of the machine.
✅ Expected result
The fitting must be securely tightened, with no air leaks.
The machine must operate normally after restart.