🔧 Replacement of the two funnel connection seals (XDC-50)
🛠️ Required tools:
4 mm Allen key
Small flat-head screwdriver or seal puller
📋 Steps to follow:
Unscrew the fixing screw
Use the 4 mm Allen key to loosen the screw located on the connection.
2. Remove the two seals
Carefully extract the worn seals from the connection using a small flat-head screwdriver or a seal puller.
3. Install the new seals
Insert two new seals into their housing.
Apply a thin layer of grease with your fingers on both the seals and the connection to facilitate assembly.
4. Reinstall the funnel
Position the funnel onto the tube.
Gently retighten the screw with the 4 mm Allen key (do not overtighten).