📏 Required Pressure
⚠️ NON-COMPLIANT PRESSURE
The pressure must strictly be between 1.6 and 2.0 bar.
🧰 Required Tools
Detailed Steps
1. 🔓 Open the panel
Unscrew the three panel screws using:
a 2.5 mm hex key
2. 🔄 Unlock the regulator knob
Pull the knob backwards to unlock it
3. ⚙️ Adjust the pressure
Turn the knob while monitoring the pressure gauge
Target: reach a pressure between 1.6 and 2.0 bar
Once adjusted, push the knob to lock it
4. 🔒 Close the panel
Re-tighten the three screws previously removed
