Here's a detailed procedure for checking that your machine is up to date and for finding the latest version of Sam Tool Manager (STM):
Procedure for checking and updating Sam Tool Manager (STM)
Step 1: Access the Sam Tool Supervisor (STS)
Login: Log in to the Sam Tool Supervisor (STS) system using your login details.
Navigation:
Go to the "SAM TOOL MANAGER Updates" tab to access update information.
Step 2: Identify the latest version of the STS
Search for the version:
Once in the update tab, search for and note the latest available version of the STM displayed on the screen.
Step 3: Check the version on the machine
Physical access:
If possible, approach the machine in question.
Verification:
You do not need to sign in. Click on "URAI" at the top left of the machine screen. The machine label will appear, indicating the current version of STM installed.
Step 4: Checking the version remotely
If you cannot physically visit the machine:
STS connection:
Return to the STS.
Navigation:
Click on "container".
Search for the container: Use the URAI number to find your specific container. Double-click on it.
Track: Then click on "Track" where you can see the current "software version" of the machine.
Step 5: Comparison and action
Comparison: Compare the noted version of the machine with the latest available version found in Step 2.
Action:
If the machine version is earlier than the latest version available, follow the update instructions provided on the technical support or contact your SAM hotline for assistance.
This procedure will allow you to efficiently check whether your machine is equipped with the latest version of Sam Tool Manager and to proceed with the update if necessary.
Instructions for updating the STM
Step 1: Restart the machine using the power button on the top of the machine.
Update OK: If on restart a pop-up appears indicating that an update has been downloaded, then the STM will restart in the next few moments with the STM up to date.
Update NOT OK: If after 5 minutes after restarting the STM remains with its old version, please contact the SAM hotline.