🎯 Objective :
Ensure proper alignment of the strut to guarantee contact with the lower position sensor.
📋 Procedure steps:
Loosen all the screws of the slides.
Slowly lower the cylinder
➡️ Check if the strut can descend until it makes contact with the sensor.If contact is established:
✅ Close the door.
Raise the strut to the upper stop
🔴 Using the RED button.Lower the strut to the lower stop
🟢 Using the GREEN button.Tighten the screws of the slides.
7. Check the result
✅ Verify that contact with the sensor is correctly made after adjustment.