Skip to main content

Should I choose an oil heater, floor heater or panel heater?

Updated over a month ago

There are advantages and disadvantages to different types of heaters. Panel heaters (with and without Wi-Fi) and floor heaters with Wi-Fi have aluminum heating elements that heat up quickly and maintain a low surface temperature. Aluminum heating elements do not burn dust and hair but rather melt them. Therefore, these heaters should not pose a fire hazard. Our floor models without Wi-Fi use heating wires that burn hair and dust. These should not be used without supervision and should only serve as an additional heat source when someone is present. Turn off this heater before going to bed.

Oil-filled radiators take longer to heat up the oil. One advantage of oil-filled heaters is that they do not "burn" the air, which leads to better air quality. This is especially beneficial if there is a lot of dust in the air. When turned off, they also retain heat longer, as the oil takes more time to cool down.

In terms of efficiency, all electric heaters are inherently 100% efficient. This means that all the electricity the heater consumes is converted into heat energy. The control panel and Wi-Fi module use a negligible amount of power.

The main difference between Oil-, Convection- and Panel-heaters:

Our convection heaters with 2000w have a wire element that reaches around 350 degrees Celsius, and which is in direct contact with the air that passes through the heater. This ensures fast and efficient heating, if you want to raise the room temperature in a short time. As the heating element is very hot and in direct contact with the passing air, this will reduce the humidity, as well as it tends to burn dust.
The 2000w versions are best described as additional heaters and are only intended for occasional use under supervision.

The panel heaters have also a heating element that is in direct contact with the air which ensures fast and efficient heating, but the heating element is different from the convection heaters. The heating element is made of aluminum and reaches a temperature of around 125 degrees. The large physical size of the element ensures good temperature transfer to the passing air, while the temperature of about 125 degrees Celsius dries out the air to a much lesser extent than convection, and is not hot enough to burn dust.

Our oil heaters work by gradually heating the oil in a closed radiator. The surface temperature is lower than convection, and it takes slightly more time to heat a room compared to convection heater. The advantage however is that the process is kinder to the indoor environment, the heating element is not in direct contact with the air that passes through the heater. The result is that the air is dried out to a much lesser extent, compared to a heater that allows the air to pass the heating element directly.

All three technologies are equally energy efficient. 100 Watt power consumption will provide 100 Watt heating, regardless of whether you choose a panel heater, free-standing convection heater or oil radiator.

We therefore advise you to choose a heater with the technology that is best suited for your needs, as panel heaters, convection heaters and oil heaters have different technologies and benefits.

Did this answer your question?