Work through these in order. Most problems are solved by step 1 or 2, and doing these properly can save you an engineer call-out charge.
1. Restart the router
Unplug it, wait 30 seconds, plug it back in. Give it a full 10–15 minutes to come back up — it takes longer than you'd think, and people often give up too early.
2. Check the setup guide
Confirm everything's connected as it should be: virginmedia.com/help/broadband/set-up-broadband
3. Hard reset
Hold a pin in the reset point at the back of the router for 30 seconds. Then give it a few minutes to come back up fully.
Note this wipes any custom WiFi name or password back to the ones printed on the router.
4. Run a wired speed test
Connect one device to the router with an ethernet cable and run a speed test.
This matters: a wired test tells you whether the problem is your connection or your WiFi signal. If wired is fine but WiFi is slow, the issue is signal coverage in the house, not the broadband itself — see Setting up your router for placement.
5. Call Virgin Media directly
If the problem survives all of the above, Virgin's support team is the fastest route — they can see the line from their end, which we can't.
Virgin Media support: 0800 052 5761
Have these ready:
Your account number
The name on the account
Your address
Your router MAC address — printed on the back of the router
6. Still stuck? Come back to us
Broadband team: +44 161 524 8708 · utilities@housr.com
Tell us what you've already tried. Saying you've done the hard reset and wired test saves a whole round of back-and-forth.
One thing worth knowing before you book an engineer
If an engineer attends and finds the fault could have been fixed by routine checks, or can't access the property, the provider applies a call-out charge and it's passed on to you.
That's the real reason the steps above are worth doing properly.