Have you verified that a compatible microSD card is inserted into the ANAFI USA drone?

Is the microSD card functioning properly without any issues?

Have you attempted a hard reset for the ANAFI USA drone to address gimbal calibration troubles?

If yes, did the gimbal calibration issues persist after the hard reset?

After performing the hard reset, did you check the microSD card for the presence of the wifi_security_key.TXT file to confirm the completion of the hard reset?

Were there any difficulties in verifying the success of the hard reset?

Did you ensure that the Skycontroller USA is not connected to any drone before initiating the reset?

Have you experienced any challenges during the 15-second button press for resetting the Skycontroller USA?

Are you aware that the same reset procedure can be performed through the Reset button on the Skycontroller USA page in FreeFlight 6 USA, even with a connected drone?

Have you attempted the reset through FreeFlight 6 USA, and if so, did it successfully restore the original ecosystem's Wi-Fi SSID and password?

Have you plugged the smart battery into a power source before attempting the hard reset?

Were there any issues with the power source or the connection during this step?

If you've experienced unexpected behavior with the smart battery, have you performed a hard reset as recommended by Parrot?

Did the battery hard reset resolve the unexpected behavior, and is the battery now functioning as expected?

When you performed the battery hard reset, did you observe the LED indicators running successively in green and red, followed by flashing alternatively in green?

Were there any deviations from the expected LED indicator behavior during the hard reset?